Datasets Information

Type: Character string

Meaning: Indicates the type of transmission line (e.g., AC, DC, overhead, underground).

Importance: Key for understanding the infrastructure and technology used in the power grid.

Importance Details:

• AC; OVERHEAD:
  • Importance: Represents the standard for long-distance transmission lines, crucial for network stability.
  • Count: 75,269
  • Grade: 0.500
• OVERHEAD:
  • Importance: General category for overhead lines, important for primary grid infrastructure.
  • Count: 15,603
  • Grade: 0.200
• AC:
  • Importance: Alternating current lines, standard for most grids due to efficiency over long distances.
  • Count: 2,218
  • Grade: 0.100
• NOT AVAILABLE:
  • Importance: Data gaps, affecting the overall completeness of the dataset.
  • Count: 641
  • Grade: 0.000
• AC; UNDERGROUND:
  • Importance: Significant for urban and environmentally sensitive areas.
  • Count: 376
  • Grade: 0.050
• UNDERGROUND:
  • Importance: General category for underground lines, crucial for certain applications where overhead lines are not feasible.
  • Count: 97
  • Grade: 0.030
• DC; OVERHEAD:
  • Importance: Used for specific high-voltage, long-distance projects.
  • Count: 6
  • Grade: 0.010
• DC:
  • Importance: Niche applications with specific efficiency advantages.
  • Count: 5
  • Grade: 0.005
• DC; UNDERGROUND:
  • Importance: Rare but significant for high-capacity, low-loss applications.
  • Count: 1
  • Grade: 0.005

Overall Importance Grade: 0.900

Type: Character string

Meaning: Indicates the operational status of the transmission line (e.g., in service, under construction).

Importance: Essential for understanding the current state and future plans of the electrical grid.

Importance Details:

• IN SERVICE:
  • Importance: Indicates active lines, crucial for assessing the operational network.
  • Count: 73,281
  • Grade: 0.800
• NOT AVAILABLE:
  • Importance: Represents data gaps, affecting dataset reliability.
  • Count: 20,817
  • Grade: 0.000
• INACTIVE:
  • Importance: Indicates decommissioned lines, relevant for historical data and future planning.
  • Count: 90
  • Grade: 0.050
• UNDER CONSTRUCTION:
  • Importance: Lines currently being built, significant for understanding future network expansions.
  • Count: 26
  • Grade: 0.030
• PROPOSED:
  • Importance: Planned lines, important for strategic planning and infrastructure development.
  • Count: 2
  • Grade: 0.020

Overall Importance Grade: 0.900

Type: Float

Meaning: The voltage level of the transmission line, which impacts its transmission capacity and suitability.

Importance: Key for understanding the capabilities and requirements of different transmission lines.

Importance Details:

• Importance: Higher voltage levels generally indicate higher capacity and efficiency for long-distance transmission.
• Grade: 0.200

Type: Character string

Meaning: Indicates the type of peak shaving facility (e.g., LNG, propane-air).

Importance: Key for understanding the type of fuel and technology used for peak shaving.

Importance Details:

• LNG PEAK SHAVING:
  • Importance: Critical for managing supply and demand during peak usage times using liquefied natural gas.
  • Count: 79
  • Grade: 0.800
• PROPANE AIR PEAK SHAVING:
  • Importance: Important for alternative fuel supply and demand management using propane-air mixtures.
  • Count: 10
  • Grade: 0.200

Overall Importance Grade: 1.000

Type: Character string

Meaning: Indicates the operational status of the facility (e.g., active, under construction).

Importance: Essential for understanding the current state and future plans of the peak shaving facilities.

Importance Details:

• ACTIVE:
  • Importance: Indicates currently operational facilities, crucial for assessing current peak shaving capabilities.
  • Count: 85
  • Grade: 0.900
• UNDER CONSTRUCTION:
  • Importance: Facilities under construction, important for future planning and capacity expansion.
  • Count: 2
  • Grade: 0.050
• UNKNOWN:
  • Importance: Indicates facilities with uncertain status, which can affect data completeness and reliability.
  • Count: 2
  • Grade: 0.050

Overall Importance Grade: 1.000

Type: Integer

Meaning: Number of tanks at the facility.

Importance: Indicative of the facility's storage capacity and peak shaving potential.

Importance Details:

• Importance: Number of tanks impacts the amount of fuel stored for peak shaving.
• Count: Range: 42, Mean: 3.092, Median: 1.0, Standard Deviation: 6.939, Minimum: 1, Maximum: 43
• Grade: 0.200

Type: Integer

Meaning: Number of vaporizers at the facility.

Importance: Essential for understanding the facility's capacity to convert stored LNG or propane-air back to gaseous form for distribution.

Importance Details:

• Importance: Number of vaporizers impacts the rate at which stored fuel can be used.
• Count: Range: 7, Mean: 2.747, Median: 3.0, Standard Deviation: 1.279, Minimum: 0, Maximum: 7
• Grade: 0.150

Type: Float

Meaning: Maximum vaporization capacity.

Importance: Crucial for determining the facility's peak shaving performance.

Importance Details:

• Importance: Higher vaporization capacity indicates better performance in meeting peak demand.
• Count: Range: 624.0, Mean: 129.676, Median: 95.0, Standard Deviation: 125.124, Minimum: 0.0, Maximum: 624.0
• Grade: 0.250

Type: Float

Meaning: Total storage capacity.

Importance: Key for understanding the overall capacity of the facility to store fuel for peak shaving.

Importance Details:

• Importance: Total storage capacity affects the facility's ability to manage supply and demand during peak usage times.
• Count: Range: 2,999,600, Mean: 337,647.048, Median: 290,000.0, Standard Deviation: 485,024.157, Minimum: 400, Maximum: 3,000,000
• Grade: 0.400

Type: Character string

Meaning: Indicates the type of LNG storage facility (e.g., vehicular fuel, storage with liquefaction).

Importance: Key for understanding the type of fuel and technology used for LNG storage.

Importance Details:

• VEHICULAR FUEL:
  • Importance: Critical for the transportation sector and reducing reliance on traditional fuels.
  • Count: 146
  • Grade: 0.400
• STORAGE W LIQUEFACTION:
  • Importance: Important for converting natural gas to LNG for storage and transport.
  • Count: 53
  • Grade: 0.300
• STORAGE W/O LIQUEFACTION:
  • Importance: Essential for storage and peak shaving without onsite gas processing.
  • Count: 42
  • Grade: 0.200
• STORAGE W BOTH:
  • Importance: Crucial for flexible LNG management.
  • Count: 16
  • Grade: 0.050
• STRANDED UTILITY:
  • Importance: Important for localized energy solutions.
  • Count: 3
  • Grade: 0.015
• NOT AVAILABLE:
  • Importance: Represents data gaps, affecting the completeness and reliability of the dataset.
  • Count: 3
  • Grade: 0.015
• OTHER:
  • Importance: Captures unique or less common storage solutions.
  • Count: 2
  • Grade: 0.010
• STORAGE - BUNKERING:
  • Importance: Important for refueling ships with LNG, supporting the maritime industry's transition to cleaner fuels.
  • Count: 1
  • Grade: 0.010

Overall Importance Grade: 1.000

Type: Character string

Meaning: Indicates the operational status of the facility (e.g., active, under construction).

Importance: Essential for understanding the current state and future plans of the LNG storage facilities.

Importance Details:

• ACTIVE:
  • Importance: Crucial for assessing current LNG storage capabilities.
  • Count: 262
  • Grade: 0.950
• UNDER CONSTRUCTION:
  • Importance: Important for future planning and capacity expansion.
  • Count: 2
  • Grade: 0.020
• ABANDONED:
  • Importance: Relevant for understanding historical data and potential environmental impacts.
  • Count: 1
  • Grade: 0.015
• NOT AVAILABLE:
  • Importance: Represents data gaps, affecting dataset reliability.
  • Count: 1
  • Grade: 0.015

Overall Importance Grade: 1.000

Type: Character string

Meaning: Indicates the source of LNG (e.g., truck, liquefaction).

Importance: Key for understanding the supply chain logistics and operational capabilities of the facility.

Importance Details:

• TRUCK:
  • Importance: Important for understanding supply chain logistics and transport infrastructure.
  • Count: 198
  • Grade: 0.700
• LIQUEFACTION:
  • Importance: Critical for understanding facility self-sufficiency and operational capabilities.
  • Count: 66
  • Grade: 0.290
• NOT AVAILABLE:
  • Importance: Represents data gaps, affecting dataset completeness and analysis.
  • Count: 2
  • Grade: 0.010

Overall Importance Grade: 1.000

Type: Character string

Meaning: Indicates the construction type of the LNG storage facility (e.g., vertical tank, refrigerated tank).

Importance: Key for understanding the design and storage capabilities of the facility.

Importance Details:

• VERTICAL TANK:
  • Importance: Significant for their space-efficient design and common use in LNG storage.
  • Count: 127
  • Grade: 0.400
• REFRIGERATED TANK:
  • Importance: Crucial for maintaining LNG at low temperatures for safe storage.
  • Count: 78
  • Grade: 0.300
• ISO HORIZONTAL TANK:
  • Importance: Important for transportability and modularity in storage solutions.
  • Count: 54
  • Grade: 0.250
• NOT AVAILABLE:
  • Importance: Represents data gaps, affecting the completeness and reliability of the dataset.
  • Count: 6
  • Grade: 0.030
• VERTICAL TANK / ISO HORIZONTAL TANK:
  • Importance: Important for understanding facility flexibility and storage strategies.
  • Count: 1
  • Grade: 0.020

Overall Importance Grade: 1.000

Type: Integer

Meaning: Number of tanks at the facility.

Importance: Indicative of the facility's storage capacity and peak shaving potential.

Importance Details:

• Importance: Number of tanks impacts the amount of fuel stored for peak shaving.
• Count: Range: 10, Mean: 1.625, Median: 1.0, Standard Deviation: 1.143, Minimum: 0, Maximum: 10
• Grade: 0.300

Type: Float

Meaning: Total storage capacity.

Importance: Key for understanding the overall capacity of the facility to store fuel for peak shaving.

Importance Details:

• Importance: Total storage capacity affects the facility's ability to manage supply and demand during peak usage times.
• Count: Range: 2,999,667, Mean: 251,028.174, Median: 116,000.0, Standard Deviation: 438,352.74, Minimum: 333, Maximum: 3,000,000
• Grade: 0.700

Type: Float

Meaning: Indicates the production capacity of the biodiesel plant in million gallons per year.

Importance: Crucial for understanding the plant's contribution to biodiesel supply.

Importance Details:

• Importance: Production capacity directly affects the plant's output and its role in the biodiesel market.
• Count: Range: 144, Mean: 35.373, Median: 35.0, Standard Deviation: 31.001, Minimum: 0, Maximum: 144
• Grade: 1.000

Type: Character string

Meaning: Indicates facilities dedicated to ethanol production.

Importance: Key for understanding the ethanol supply infrastructure.

Importance Details:

• ETHANOL PLANT:
  • Importance: Crucial for understanding the ethanol supply infrastructure.
  • Count: 242
  • Grade: 1.000

Overall Importance Grade: 1.000

Type: Character string

Meaning: Indicates the operational status of the facility (e.g., in service, under construction).

Importance: Essential for understanding the current state and future plans of the ethanol plants.

Importance Details:

• IN SERVICE:
  • Importance: Crucial for assessing current ethanol production capabilities.
  • Count: 237
  • Grade: 0.950
• UNDER CONSTRUCTION:
  • Importance: Important for future production capacity and planning.
  • Count: 4
  • Grade: 0.040
• IDLE:
  • Importance: Affects overall production and supply.
  • Count: 1
  • Grade: 0.010

Overall Importance Grade: 1.000

Type: Character string

Meaning: Indicates the type of feedstock used in ethanol production.

Importance: Key for understanding the input materials for ethanol production.

Importance Details:

• CORN KERNELS, MILO, GRAINS, SUGAR:
  • Importance: Important for understanding the range of inputs used in ethanol production.
  • Count: 117
  • Grade: 0.300
• CORN KERNELS:
  • Importance: Significant for understanding the reliance on corn.
  • Count: 80
  • Grade: 0.200
• CORN KERNELS, MILO:
  • Importance: Relevant for production variability and feedstock sourcing.
  • Count: 6
  • Grade: 0.050
• GRAINS:
  • Importance: Important for understanding feedstock diversity.
  • Count: 6
  • Grade: 0.050
• BEVERAGE AND/OR BREWERY WASTE:
  • Importance: Important for sustainability and waste reduction in ethanol production.
  • Count: 4
  • Grade: 0.030
• MUNICIPAL SOLID WASTE:
  • Importance: Crucial for understanding innovative and sustainable feedstock sources.
  • Count: 3
  • Grade: 0.025
• CORN KERNELS, GRAINS:
  • Importance: Important for understanding feedstock flexibility.
  • Count: 3
  • Grade: 0.025
• WHEY:
  • Importance: Significant for understanding alternative and less common feedstocks.
  • Count: 2
  • Grade: 0.020
• SUGAR:
  • Importance: Important for understanding feedstock diversity.
  • Count: 2
  • Grade: 0.020
• WOODY BIOMASS:
  • Importance: Relevant for sustainable and renewable feedstock sources.
  • Count: 2
  • Grade: 0.020
• CORN STOVER:
  • Importance: Important for understanding agricultural waste use in ethanol production.
  • Count: 2
  • Grade: 0.020
• CORN STOVER, ENERGY GRASSES:
  • Importance: Significant for feedstock diversity and sustainability.
  • Count: 2
  • Grade: 0.020
• CORN KERNELS, SUGAR:
  • Importance: Important for feedstock flexibility.
  • Count: 2
  • Grade: 0.020
• WASTE DRIVEN:
  • Importance: Crucial for understanding sustainable and waste-reducing practices.
  • Count: 1
  • Grade: 0.010
• WOODY BIOMASS, WOODY SUGARS:
  • Importance: Relevant for innovative and renewable feedstocks.
  • Count: 1
  • Grade: 0.010
• CORN KERNELS, CORN KERNEL FIBER:
  • Importance: Important for maximizing use of agricultural products.
  • Count: 1
  • Grade: 0.010
• MILO, GRAINS:
  • Importance: Significant for feedstock diversity.
  • Count: 1
  • Grade: 0.010
• ENERGY GRASSES:
  • Importance: Important for renewable and sustainable ethanol production.
  • Count: 1
  • Grade: 0.010
• WOOD SUGARS:
  • Importance: Relevant for innovative and renewable feedstocks.
  • Count: 1
  • Grade: 0.010
• CORN KERNELS, MILO, GRAINS:
  • Importance: Important for feedstock flexibility.
  • Count: 1
  • Grade: 0.010
• CORN KERNELS, ENERGY TOBACCO:
  • Importance: Significant for understanding alternative feedstocks.
  • Count: 1
  • Grade: 0.010
• WASTE SUGAR, STARCHES:
  • Importance: Crucial for sustainability and waste reduction in ethanol production.
  • Count: 1
  • Grade: 0.010
• CORN STOVER, ENERGY GRASSES, WOODY BIOMASS:
  • Importance: Significant for understanding feedstock flexibility and sustainability.
  • Count: 1
  • Grade: 0.010
• MUNICIPAL SOLID WASTE, WOODY BIOMASS:
  • Importance: Important for sustainable and innovative feedstock sources.
  • Count: 1
  • Grade: 0.010

Overall Importance Grade: 1.000

Type: Float

Meaning: Current production capacity.

Importance: Crucial for understanding the plant's contribution to ethanol supply.

Importance Details:

• Importance: Production capacity directly affects the plant's output and its role in the ethanol market.
• Count: Range: 364.8, Mean: 65.96, Median: 55.0, Standard Deviation: 49.45, Minimum: 0.2, Maximum: 365.0
• Grade: 0.700

Type: Float

Meaning: Nameplate capacity, the maximum production capacity under ideal conditions.

Importance: Important for understanding the plant's potential output.

Importance Details:

• Importance: Nameplate capacity indicates the plant's maximum output under ideal conditions.
• Count: Range: 54.987, Mean: 4.517, Median: 3.588, Standard Deviation: 4.605, Minimum: 0.013, Maximum: 55.0
• Grade: 0.300

Type: Float

Meaning: Length of the hydrocarbon gas liquid pipeline in kilometers.

Importance: Crucial for understanding the extent and coverage of the pipeline network.

Importance Details:

• Importance: Indicates the length of the hydrocarbon gas liquid pipeline in kilometers, crucial for understanding the extent and coverage of the pipeline network.
• Count: Range: 29.297, Mean: 5.327, Median: 3.123, Standard Deviation: 5.659, Minimum: 0.03, Maximum: 29.327
• Grade: 0.500

Type: Float

Meaning: Length of the hydrocarbon gas liquid pipeline in meters.

Importance: Provides a more precise measurement of the pipeline's extent.

Importance Details:

• Importance: Represents the length of the hydrocarbon gas liquid pipeline in meters, providing a more precise measurement of the pipeline's extent.
• Count: Range: 3,657,944.06, Mean: 651,313.774, Median: 374,149.998, Standard Deviation: 686,584.374, Minimum: 3,706.357, Maximum: 3,661,650.417
• Grade: 0.500

Type: Character string

Meaning: Determines the nature of the terminal's operation, whether it's importing or exporting LNG.

Importance: Determines the nature of the terminal's operation.

Importance Details:

• IMPORT:
  • Importance: Crucial for understanding terminals focused on receiving LNG.
  • Count: 14
  • Grade: 0.600
• EXPORT:
  • Importance: Important for understanding terminals focused on sending out LNG.
  • Count: 11
  • Grade: 0.400

Overall Importance Grade: 1.000

Type: Character string

Meaning: Indicates the operational status of the terminal.

Importance: Indicates the operational status of the terminal, which is essential for understanding current and future capabilities.

Importance Details:

• IN SERVICE:
  • Importance: Key for assessing current operational capacity.
  • Count: 20
  • Grade: 0.800
• UNDER CONSTRUCTION:
  • Importance: Important for future capacity planning.
  • Count: 4
  • Grade: 0.160
• SUSPENDED:
  • Importance: Affects overall operational capacity.
  • Count: 1
  • Grade: 0.040

Overall Importance Grade: 1.000

Type: Character string

Meaning: Describes the type of container used for LNG.

Importance: Describes the type of container used for LNG, which impacts logistics and transportation.

Importance Details:

• LNG TANKER:
  • Importance: Critical for understanding standard LNG transport.
  • Count: 24
  • Grade: 0.960
• ISO CONTAINER:
  • Importance: Important for niche transport scenarios.
  • Count: 1
  • Grade: 0.040

Overall Importance Grade: 1.000

Type: Character string

Meaning: Identifies the ports associated with the terminals.

Importance: Identifies the ports associated with the terminals, crucial for logistics and geographic analysis.

Importance Details:

• Major Ports:
  • COVE POINT: Importance: Key port for LNG logistics. Count: 3. Grade: 0.120
  • ELBA ISLAND: Importance: Significant for LNG logistics. Count: 2. Grade: 0.080
  • HACKBERRY: Importance: Important for LNG logistics. Count: 2. Grade: 0.080
  • SABINE PASS: Importance: Major LNG port. Count: 2. Grade: 0.080
  • FREEPORT: Importance: Major LNG port. Count: 2. Grade: 0.080
• Summary for Smaller Ports:
  • Importance: Collectively important for understanding overall logistics.
  • Count: Various
  • Grade: 0.560

Overall Importance Grade: 1.000

Type: Character string

Meaning: Identifies the countries involved in LNG import and export.

Importance: Identifies the countries involved in LNG import and export, important for understanding international trade dynamics.

Importance Details:

• NOT APPLICABLE:
  • Importance: Not relevant for international analysis.
  • Count: 13
  • Grade: 0.500
• Country combinations (e.g., TTO, FRA, GBR, etc.):
  • Importance: Critical for understanding specific international trade relationships.
  • Count: Various
  • Grade: 0.500

Overall Importance Grade: 1.000

Type: Float

Meaning: Indicates the storage capacity of the terminal.

Importance: Indicates the storage capacity of the terminal, crucial for assessing the scale of operations.

Importance Details:

• Importance: Indicates the storage capacity of the terminal, crucial for assessing the scale of operations.
• Metrics: Range: 18.0, Mean: 9.515, Median: 10.25, Standard Deviation: 5.825, Minimum: 0.0, Maximum: 18.0
• Grade: 0.200

Type: Float

Meaning: Represents the current operational capacity.

Importance: Represents the current operational capacity, important for understanding the current output.

Importance Details:

• Importance: Represents the current operational capacity, important for understanding the current output.
• Metrics: Range: 4.0, Mean: 1.148, Median: 1.0, Standard Deviation: 1.038, Minimum: 0.0, Maximum: 4.0
• Grade: 0.200

Type: Integer

Meaning: Indicates the number of berths available.

Importance: Indicates the number of berths available, which affects the terminal's ability to handle multiple ships simultaneously.

Importance Details:

• Importance: Indicates the number of berths available, which affects the terminal's ability to handle multiple ships simultaneously.
• Metrics: Range: 2, Mean: 1.5, Median: 2.0, Standard Deviation: 0.657, Minimum: 0, Maximum: 2
• Grade: 0.100

Type: Integer

Meaning: Shows the number of storage units.

Importance: Shows the number of storage units, important for understanding storage infrastructure.

Importance Details:

• Importance: Shows the number of storage units, important for understanding storage infrastructure.
• Metrics: Range: 6, Mean: 3.391, Median: 3.0, Standard Deviation: 1.763, Minimum: 1, Maximum: 7
• Grade: 0.200

Type: Float

Meaning: Indicates the approved capacity.

Importance: Indicates the approved capacity, providing a regulatory perspective on operational limits.

Importance Details:

• Importance: Indicates the approved capacity, providing a regulatory perspective on operational limits.
• Metrics: Range: 3.685, Mean: 1.757, Median: 1.41, Standard Deviation: 1.126, Minimum: 0.315, Maximum: 4.0
• Grade: 0.150

Type: Float

Meaning: Shows the annual volume handled by the terminal.

Importance: Shows the annual volume handled by the terminal, critical for understanding throughput.

Importance Details:

• Importance: Shows the annual volume handled by the terminal, critical for understanding throughput.
• Metrics: Range: 932.0, Mean: 57.978, Median: 0.0, Standard Deviation: 203.071, Minimum: 0.0, Maximum: 932.0
• Grade: 0.150

• TYPE: 0.200
• STATUS: 0.250
• CONTYPE: 0.200
• IE_PORT: 0.200
• IMPEXPCTRY: 0.150

• STORCAP: 0.200
• CURRENTCAP: 0.200
• BERTHS: 0.100
• STORAGE: 0.200
• APPCAP: 0.150
• VOLUME: 0.150

• Total Qualitative Grade: 1.000
• Total Quantitative Grade: 1.000
• Overall Dataset Importance Grade: 1.000

Type: Character string

Meaning: Describes the type of the compressor station, which impacts its function and role in the natural gas network.

Importance: Determines the operational nature of the compressor station.

Importance Details:

• NATURAL GAS COMPRESSOR STATION:
  • Importance: Essential for understanding the infrastructure's capacity to maintain pressure in the pipeline.
  • Count: 2302
  • Grade: 1.000

Overall Importance Grade: 1.000

Type: Character string

Meaning: Indicates the operational status of the compressor station.

Importance: Critical for understanding the operational status and potential capacity of the infrastructure.

Importance Details:

• IN SERVICE:
  • Importance: Key for assessing current operational capacity.
  • Count: 2193
  • Grade: 0.800
• NOT AVAILABLE:
  • Importance: Represents data gaps or uncertainties.
  • Count: 46
  • Grade: 0.100
• SUSPENDED:
  • Importance: Affects overall operational capacity.
  • Count: 38
  • Grade: 0.070
• ABANDONED:
  • Importance: Represents facilities that are no longer operational.
  • Count: 22
  • Grade: 0.025
• CLOSED:
  • Importance: Indicates a permanent closure, affecting the network's capacity.
  • Count: 3
  • Grade: 0.005

Overall Importance Grade: 1.000

Type: Integer

Meaning: Indicates the number of compressor units at the station.

Importance: Important for understanding the station's compression capacity.

Importance Details:

• Importance: Indicates the number of compressor units at the station, which affects overall throughput capacity.
• Metrics: Range: 23, Mean: 3.557, Median: 3.0, Standard Deviation: 3.069, Minimum: 0, Maximum: 23
• Grade: 0.150

Type: Integer

Meaning: Indicates the certified horsepower of the compressor station.

Importance: Critical for understanding the power available to maintain gas pressure in the pipeline.

Importance Details:

• Importance: Indicates the certified horsepower, which is crucial for maintaining pipeline pressure and throughput.
• Metrics: Range: 128688, Mean: 17417.388, Median: 11530.0, Standard Deviation: 17685.715, Minimum: 0, Maximum: 128688
• Grade: 0.200

Type: Integer

Meaning: Indicates the total cost of the compressor station.

Importance: Important for understanding the economic investment and infrastructure value.

Importance Details:

• Importance: Indicates the total cost of the compressor station, reflecting the economic investment and infrastructure value.
• Metrics: Range: 271046284, Mean: 34341972.863, Median: 20871289.0, Standard Deviation: 41166601.785, Minimum: 0, Maximum: 271046284
• Grade: 0.150

Type: Integer

Meaning: Indicates the annual expenditure on fuel for the compressor station.

Importance: Important for assessing operational costs and efficiency.

Importance Details:

• Importance: Indicates the annual expenditure on fuel, reflecting operational efficiency and costs.
• Metrics: Range: 10748789, Mean: 608121.597, Median: 110215.0, Standard Deviation: 1047775.959, Minimum: 0, Maximum: 10748789
• Grade: 0.100

Type: Integer

Meaning: Indicates the annual expenditure on other operational costs.

Importance: Important for understanding the full operational costs of the station.

Importance Details:

• Importance: Indicates the annual expenditure on other operational costs, providing insight into overall operational expenses.
• Metrics: Range: 7275281, Mean: 529392.259, Median: 249276.0, Standard Deviation: 798301.286, Minimum: 0, Maximum: 7275281
• Grade: 0.100

Type: Integer

Meaning: Indicates the volume of gas compressed at the station.

Importance: Critical for understanding the station's contribution to the overall gas pipeline network.

Importance Details:

• Importance: Indicates the volume of gas compressed, which is essential for maintaining pipeline efficiency and capacity.
• Metrics: Range: 5038461, Mean: 331204.486, Median: 93476.0, Standard Deviation: 518611.185, Minimum: 0, Maximum: 5038461
• Grade: 0.150

Type: Integer

Meaning: Indicates the number of operational compressor units.

Importance: Important for assessing the operational capability of the station.

Importance Details:

• Importance: Indicates the number of operational compressor units, which reflects the station's active compression capacity.
• Metrics: Range: 18, Mean: 2.54, Median: 2.0, Standard Deviation: 2.716, Minimum: 0, Maximum: 18
• Grade: 0.100

• TYPE: 0.400
• STATUS: 0.600

• NUM_UNITS: 0.150
• CERT_HP: 0.200
• PLANT_COST: 0.150
• EXP_FUEL: 0.100
• EXP_OTHER: 0.100
• GAS_COMPRE: 0.150
• OP_NUM_COM: 0.100

• Total Qualitative Grade: 1.000
• Total Quantitative Grade: 1.000
• Overall Dataset Importance Grade: 1.000

Type: Character string

Meaning: Describes the type of pipeline, whether it is interstate, intrastate, gathering, or other.

Importance: Determines the type of pipeline, impacting regulatory requirements and operational scope.

Importance Details:

• Interstate:
  • Importance: Critical for understanding pipelines that cross state boundaries, subject to federal regulations.
  • Count: 18576
  • Grade: 0.600
• Intrastate:
  • Importance: Important for understanding pipelines within a single state, subject to state regulations.
  • Count: 15155
  • Grade: 0.350
• Gathering:
  • Importance: Relevant for small-scale pipelines collecting gas from multiple sources.
  • Count: 69
  • Grade: 0.040
• Other:
  • Importance: Represents less common or unspecified pipeline types, affecting overall analysis.
  • Count: 6
  • Grade: 0.010

Overall Importance Grade: 1.000

Type: Float

Meaning: Indicates the length of the pipeline.

Importance: Key for understanding the scale and reach of the pipeline network.

Importance Details:

• Importance: The length of the pipeline is crucial for determining the network's scale, coverage, and capacity.
• Metrics: Range: 1000.0, Mean: 0.141, Median: 0.056, Standard Deviation: 5.442, Minimum: 0.0, Maximum: 1000.0
• Grade: 1.000

• TYPEPIPE: 0.500

• Shape_Leng: 1.000

• Total Qualitative Grade: 0.500
• Total Quantitative Grade: 1.000
• Overall Dataset Importance Grade: 1.000

Type: Character string

Meaning: Indicates the specific type of natural gas processing or extraction plant.

Importance: Determines the operational focus and capabilities of the facility.

Importance Details:

• NATURAL GAS LIQUIDS EXTRACTION PLANT:
  • Importance: Essential for identifying facilities focused on extracting valuable liquids from natural gas.
  • Count: 226
  • Grade: 0.300
• NATURAL GAS PROCESSING PLANT:
  • Importance: Crucial for identifying plants focused on processing natural gas.
  • Count: 214
  • Grade: 0.250
• NOT AVAILABLE:
  • Importance: Less important due to lack of specific information.
  • Count: 87
  • Grade: 0.100
• NATURAL GAS PROCESSING AND NATURAL GAS LIQUIDS EXTRACTION PLANT:
  • Importance: Significant for dual-function plants handling both processing and liquids extraction.
  • Count: 83
  • Grade: 0.150
• CRUDE PETROLEUM AND NATURAL GAS EXTRACTION PLANT:
  • Importance: Important for identifying plants handling both petroleum and gas extraction.
  • Count: 75
  • Grade: 0.125
• SWEET NATURAL GAS PROCESSING PLANT:
  • Importance: Specific to facilities processing 'sweet' natural gas.
  • Count: 25
  • Grade: 0.075

Overall Importance Grade: 1.000

Type: Character string

Meaning: Indicates the operational status of the plant.

Importance: Provides insight into whether the facility is currently operational, which affects its impact on the infrastructure.

Importance Details:

• ACTIVE:
  • Importance: Critical for identifying operational facilities.
  • Count: 769
  • Grade: 0.800
• NOT AVAILABLE:
  • Importance: Less important due to lack of specific status information.
  • Count: 56
  • Grade: 0.150
• INACTIVE:
  • Importance: Relevant for identifying facilities that are currently not in operation.
  • Count: 15
  • Grade: 0.050

Overall Importance Grade: 1.000

Type: Float

Meaning: Represents the gas capacity of the plant.

Importance: Indicates the plant's capacity to process natural gas, crucial for understanding its operational scale.

Importance Details:

• Metrics: Range: 2400.0, Mean: 143.759, Median: 60.0, Standard Deviation: 246.266, Minimum: 0.0, Maximum: 2400.0
• Grade: 0.250

Type: Float

Meaning: Measures the daily flow of gas processed by the plant.

Importance: Critical for understanding the throughput capacity of the plant.

Importance Details:

• Metrics: Range: 1633.0, Mean: 96.606, Median: 36.0, Standard Deviation: 166.807, Minimum: 0.0, Maximum: 1633.0
• Grade: 0.250

Type: Float

Meaning: Indicates the energy content per cubic foot of gas processed.

Importance: Important for evaluating the energy efficiency and quality of the gas processed.

Importance Details:

• Metrics: Range: 1790.0, Mean: 1165.104, Median: 1180.0, Standard Deviation: 191.277, Minimum: 80.0, Maximum: 1870.0
• Grade: 0.150

Type: Integer

Meaning: Represents the amount of gas processed in terms of thousand barrels per day.

Importance: Crucial for understanding the overall processing capacity and output.

Importance Details:

• Metrics: Range: 126963171, Mean: 1707440.937, Median: 300000.0, Standard Deviation: 7486606.894, Minimum: 0, Maximum: 126963171
• Grade: 0.150

Type: Float

Meaning: Represents the gas storage capacity of the plant.

Importance: Important for understanding the plant's ability to store processed gas.

Importance Details:

• Metrics: Range: 44.8, Mean: 14.1, Median: 1.0, Standard Deviation: 17.452, Minimum: 0.2, Maximum: 45.0
• Grade: 0.100

Type: Float

Meaning: Represents the liquid storage capacity of the plant.

Importance: Significant for understanding the plant's capacity to store extracted liquids.

Importance Details:

• Metrics: Range: 445980.0, Mean: 7850.216, Median: 1678.5, Standard Deviation: 27545.829, Minimum: 20.0, Maximum: 446000.0
• Grade: 0.100

• TYPE: 0.500
• STATUS: 0.500

• GASCAP: 0.250
• PLANTFLOW: 0.250
• BTUCONTENT: 0.150
• PROCAMTBLS: 0.150
• GASSTORCAP: 0.100
• LIQSTORCAP: 0.100

• Total Qualitative Grade: 1.000
• Total Quantitative Grade: 1.000
• Overall Dataset Importance Grade: 1.000

Type: Character string

Meaning: Defines the specific type of terminal, which is critical for understanding its operational role.

Importance: Defines the specific type of terminal, which is critical for understanding its operational role.

Importance Details:

• BULK TERMINAL:
  • Importance: Most common terminal type, essential for understanding the majority of storage and distribution operations.
  • Count: 882
  • Grade: 0.300
• MARINE TERMINAL:
  • Importance: Critical for understanding terminals that handle marine-based logistics.
  • Count: 588
  • Grade: 0.250
• REFINERY TERMINAL:
  • Importance: Important for refining and distribution processes.
  • Count: 147
  • Grade: 0.100
• Other Types:
  • Importance: Collectively important for understanding niche terminal operations.
  • Count: Various
  • Grade: 0.350

Overall Importance Grade: 1.000

Type: Character string

Meaning: Indicates the current operational status.

Importance: Indicates the current operational status, essential for operational planning and risk assessment.

Importance Details:

• IN SERVICE:
  • Importance: Key indicator of current operational capacity.
  • Count: 2304
  • Grade: 0.950
• DISMANTLED:
  • Importance: Indicates loss of infrastructure, relevant for historical analysis.
  • Count: 24
  • Grade: 0.030
• NOT IN USE:
  • Importance: Important for understanding idle or repurposable infrastructure.
  • Count: 10
  • Grade: 0.020

Overall Importance Grade: 1.000

Type: Character string

Meaning: Specifies the type of commodity stored or processed, crucial for understanding the terminal's function.

Importance: Specifies the type of commodity stored or processed, crucial for understanding the terminal's function.

Importance Details:

• REFINED:
  • Importance: Most common commodity, critical for terminal operations.
  • Count: 735
  • Grade: 0.250
• REFINED, CHEMICALS:
  • Importance: Handling both refined products and chemicals adds complexity and significance to terminal operations.
  • Count: 429
  • Grade: 0.150
• NOT AVAILABLE:
  • Importance: Data missing, which impacts overall analysis.
  • Count: 246
  • Grade: 0.050
• CRUDE:
  • Importance: Important for terminals handling raw material inputs.
  • Count: 177
  • Grade: 0.100
• Other Commodities:
  • Importance: Various other combinations and types of commodities add to the complexity and scope of terminal operations.
  • Count: Various
  • Grade: 0.450

Overall Importance Grade: 1.000

Type: Character string

Meaning: Indicates the terminal's proximity to residential areas.

Importance: Indicates the terminal's proximity to residential areas, important for assessing environmental and safety risks.

Importance Details:

• WITHIN 40 FEET:
  • Importance: Critical for understanding terminals in close proximity to residential areas.
  • Count: 2299
  • Grade: 0.900
• WITHIN 1 MILE:
  • Importance: Important for broader safety and environmental assessments.
  • Count: 28
  • Grade: 0.050
• Other Proximities:
  • Importance: Relevant but less critical.
  • Count: Various
  • Grade: 0.050

Overall Importance Grade: 1.000

Type: Character string

Meaning: Indicates whether the terminal has inbound or outbound truck transportation.

Importance: Defines transportation modes used by the terminal, critical for logistical planning and infrastructure analysis.

Importance Details:

• YES:
  • Importance: Indicates active transportation methods, crucial for logistical understanding.
  • Count: 1809 (IN) / 1841 (OUT)
  • Grade: 0.700
• NO:
  • Importance: Relevant for identifying unused transportation modes.
  • Count: 489 (IN) / 427 (OUT)
  • Grade: 0.250
• NOT AVAILABLE:
  • Importance: Affects data completeness.
  • Count: 40 (IN) / 70 (OUT)
  • Grade: 0.050

Overall Importance Grade: 1.000

Type: Character string

Meaning: Indicates whether the terminal has inbound or outbound pipeline transportation.

Importance: Defines pipeline transportation modes used by the terminal, essential for understanding infrastructure connections.

Importance Details:

• YES:
  • Importance: Key for understanding pipeline connectivity and logistics.
  • Count: 1662 (IN) / 1609 (OUT)
  • Grade: 0.700
• NO:
  • Importance: Indicates the absence of pipeline connectivity.
  • Count: 591 (IN) / 651 (OUT)
  • Grade: 0.250
• NOT AVAILABLE:
  • Importance: Affects data completeness.
  • Count: 85 (IN) / 78 (OUT)
  • Grade: 0.050

Overall Importance Grade: 1.000

Type: Character string

Meaning: Indicates whether the terminal has inbound or outbound marine transportation.

Importance: Defines marine transportation modes used by the terminal, critical for coastal and river-based logistics.

Importance Details:

• YES:
  • Importance: Critical for understanding marine logistics.
  • Count: 801 (IN) / 785 (OUT)
  • Grade: 0.500
• NO:
  • Importance: Indicates the absence of marine connectivity.
  • Count: 1506 (IN) / 1520 (OUT)
  • Grade: 0.450
• NOT AVAILABLE:
  • Importance: Affects data completeness.
  • Count: 31 (IN) / 33 (OUT)
  • Grade: 0.050

Overall Importance Grade: 1.000

Type: Character string

Meaning: Indicates whether the terminal has inbound or outbound rail transportation.

Importance: Defines rail transportation modes used by the terminal, essential for understanding land-based logistics.

Importance Details:

• YES:
  • Importance: Critical for understanding rail logistics.
  • Count: 598 (IN) / 590 (OUT)
  • Grade: 0.450
• NO:
  • Importance: Indicates the absence of rail connectivity.
  • Count: 1710 (IN) / 1717 (OUT)
  • Grade: 0.500
• NOT AVAILABLE:
  • Importance: Affects data completeness.
  • Count: 30 (IN) / 31 (OUT)
  • Grade: 0.050

Overall Importance Grade: 1.000

Type: Character strings for each commodity

Meaning: Specifies whether the terminal handles specific commodities, important for understanding the scope of operations.

Importance: Specifies whether the terminal handles specific commodities, important for understanding the scope of operations.

Importance Details:

• ASPHALT:
  • Importance: Essential for construction and paving operations.
  • Count: 312
  • Grade: 0.080
• CHEMICALS:
  • Importance: Critical for industrial operations.
  • Count: 833
  • Grade: 0.100
• PROPANE:
  • Importance: Important for heating and energy.
  • Count: 189
  • Grade: 0.050
• BUTANE:
  • Importance: Critical for fuel blending and industrial uses.
  • Count: 140
  • Grade: 0.040
• REFINED:
  • Importance: Central to terminal operations, includes a wide range of refined products.
  • Count: 1453
  • Grade: 0.200
• ETHANOL:
  • Importance: Essential for biofuel production and blending.
  • Count: 231
  • Grade: 0.060
• BIODIESEL:
  • Importance: Important for renewable energy initiatives.
  • Count: 103
  • Grade: 0.050
• CRUDE_OIL:
  • Importance: Core to terminal operations as a primary input for refineries.
  • Count: 362
  • Grade: 0.150
• JETFUEL:
  • Importance: Crucial for aviation industry operations.
  • Count: 466
  • Grade: 0.100
• GASOLINE:
  • Importance: Central to transportation and fueling operations.
  • Count: 500
  • Grade: 0.120
• DISTILLATE:
  • Importance: Important for heating and diesel fuel operations.
  • Count: 1167
  • Grade: 0.200
• AVGAS:
  • Importance: Specific to aviation, crucial for smaller aircraft.
  • Count: 94
  • Grade: 0.050

Overall Importance Grade: 1.000

Type: Float

Meaning: Indicates the storage capacity of the terminal.

Importance: Indicates the storage capacity of the terminal, crucial for understanding the scale of operations.

Importance Details:

• Importance: Indicates the storage capacity of the terminal, crucial for understanding the scale of operations.
• Metrics: Range: 95000000.0, Mean: 958855.822, Median: 250667.0, Standard Deviation: 3425854.861, Minimum: 0.0, Maximum: 95000000.0
• Grade: 0.200

• TYPE: 0.250
• STATUS: 0.200
• COMMODITY: 0.300
• POSREL: 0.100
• TRUCK_IN/OUT: 0.050
• PIPE_IN/OUT: 0.050
• MARINE_IN/OUT: 0.050
• RAIL_IN/OUT: 0.050
• COMMODITIES: 0.250

• CAPACITY: 0.200

• Total Qualitative Grade: 1.000
• Total Quantitative Grade: 0.200
• Overall Dataset Importance Grade: 1.200

Type: Character string

Meaning: Describes the size and complexity of the refinery.

Importance: Determines the scale and operational capacity of the refinery.

Importance Details:

• LARGE COMPLEX REFINERY:
  • Importance: Crucial for the production of a wide range of refined products and plays a significant role in the oil industry due to its complexity and scale.
  • Count: 18
  • Grade: 0.250
• MEDIUM SIZED MEDIUM COMPLEXITY REFINERY:
  • Importance: Important for regional production and serves as a balance between large-scale and small-scale operations.
  • Count: 12
  • Grade: 0.150
• VERY LARGE COMPLEX REFINERY:
  • Importance: Pivotal in handling high volumes of crude oil and producing large quantities of refined products, making them key players in the industry.
  • Count: 10
  • Grade: 0.200
• Summary for Other Types:
  • Importance: The remaining refinery types, while individually less significant, collectively contribute to the diversity and specialization within the industry.
  • Count: Various
  • Grade: 0.400

Overall Importance Grade: 1.000

Type: Character string

Meaning: Indicates the operational status of the refinery.

Importance: Indicates the operational status of the refinery, which is essential for understanding current and future production capacity.

Importance Details:

• IN SERVICE:
  • Importance: Key for assessing current operational capacity.
  • Count: 151
  • Grade: 0.900
• CLOSED:
  • Importance: Important for historical analysis and understanding shifts in production capacity.
  • Count: 4
  • Grade: 0.100

Overall Importance Grade: 1.000

Type: Character string

Meaning: Indicates the proximity to other infrastructure or sensitive areas.

Importance: Critical for understanding environmental and safety concerns, as well as regulatory compliance.

Importance Details:

• WITHIN 166 FEET:
  • Importance: Highly significant for understanding safety and regulatory measures.
  • Count: 151
  • Grade: 0.900
• WITHIN 1 MILE:
  • Importance: Important for understanding the impact of the refinery on a broader area.
  • Count: 3
  • Grade: 0.080
• WITHIN 40 FEET:
  • Importance: Extremely close proximity impacts safety and regulatory measures.
  • Count: 1
  • Grade: 0.020

Overall Importance Grade: 1.000

Type: Float

Meaning: Indicates the overall production capacity of the refinery.

Importance: Crucial for understanding the scale and output potential of the refinery.

Importance Details:

• Metrics: Range: 603000, Mean: 130401.368, Median: 89000.0, Standard Deviation: 123628.181, Max: 603000, Min: 0
• Grade: 0.200

Type: Integer

Meaning: Ranks the refinery within the U.S.

Importance: Important for competitive and comparative analysis within the industry.

Importance Details:

• Metrics: Range: 140, Mean: 70.786, Median: 70.5, Standard Deviation: 40.768, Max: 141, Min: 1
• Grade: 0.100

Type: Float

Meaning: Measures the crude oil input capacity.

Importance: Essential for understanding the refinery’s processing capability.

Importance Details:

• Metrics: Range: 603000, Mean: 128225.361, Median: 89000.0, Standard Deviation: 124914.497, Max: 603000, Min: 0
• Grade: 0.150

Type: Float

Meaning: Indicates the vacuum distillation capacity.

Importance: Important for understanding the refinery’s ability to process heavier crudes.

Importance Details:

• Metrics: Range: 331800, Mean: 63241.699, Median: 36200.0, Standard Deviation: 73255.636, Max: 331800, Min: 0
• Grade: 0.100

Type: Float

Meaning: Measures coking capacity.

Importance: Crucial for handling heavy residues and maximizing crude utilization.

Importance Details:

• Metrics: Range: 150000, Mean: 19024.097, Median: 0.0, Standard Deviation: 29698.913, Max: 150000, Min: 0
• Grade: 0.050

Type: Float

Meaning: Thermal operations capacity.

Importance: Significant for understanding the refinery's capability to handle specific refining processes.

Importance Details:

• Metrics: Range: 25499, Mean: 491.455, Median: 0.0, Standard Deviation: 2867.775, Max: 25499, Min: 0
• Grade: 0.020

Type: Float

Meaning: Measures the catalytic cracking capacity.

Importance: Essential for converting heavy oils into more valuable products like gasoline.

Importance Details:

• Metrics: Range: 232500, Mean: 39283.792, Median: 24850.0, Standard Deviation: 43959.245, Max: 232500, Min: 0
• Grade: 0.100

Type: Float

Meaning: Catalytic reforming capacity.

Importance: Important for upgrading low-octane naphthas into high-octane gasoline.

Importance Details:

• Metrics: Range: 142000, Mean: 23872.084, Median: 17000.0, Standard Deviation: 27455.938, Max: 142000, Min: 0
• Grade: 0.050

Type: Float

Meaning: Catalytic hydrocracking capacity.

Importance: Significant for producing higher yields of diesel and other distillates.

Importance Details:

• Metrics: Range: 144900, Mean: 15715.649, Median: 0.0, Standard Deviation: 26965.349, Max: 144900, Min: 0
• Grade: 0.050

Type: Float

Meaning: Catalytic hydrotreating capacity.

Importance: Essential for removing sulfur and other impurities from petroleum products.

Importance Details:

• Metrics: Range: 794000, Mean: 121183.071, Median: 77500.0, Standard Deviation: 136248.889, Max: 794000, Min: 0
• Grade: 0.100

Type: Float

Meaning: Alkylation unit capacity.

Importance: Important for producing high-octane gasoline components.

Importance Details:

• Metrics: Range: 41000, Mean: 8781.195, Median: 5502.0, Standard Deviation: 9986.352, Max: 41000, Min: 0
• Grade: 0.030

Type: Float

Meaning: Polymerization/dimerization capacity.

Importance: Adds to the production of synthetic rubbers and plastics.

Importance Details:

• Metrics: Range: 8806, Mean: 63.019, Median: 0.0, Standard Deviation: 710.507, Max: 8806, Min: 0
• Grade: 0.010

Type: Float

Meaning: Aromatics production capacity.

Importance: Important for producing benzene, toluene, and xylene, which are critical in the chemical industry.

Importance Details:

• Metrics: Range: 36500, Mean: 2253.299, Median: 0.0, Standard Deviation: 5983.76, Max: 36500, Min: 0
• Grade: 0.020

Type: Float

Meaning: Isomerization capacity.

Importance: Critical for upgrading low-octane components into higher-octane products.

Importance Details:

• Metrics: Range: 72500, Mean: 6469.253, Median: 0.0, Standard Deviation: 12729.294, Max: 72500, Min: 0
• Grade: 0.030

Type: Float

Meaning: Lubricants production capacity.

Importance: Important for producing lubricating oils used in various industries.

Importance Details:

• Metrics: Range: 39000, Mean: 1797.656, Median: 0.0, Standard Deviation: 6284.557, Max: 39000, Min: 0
• Grade: 0.020

Type: Float

Meaning: Oxygenates production capacity.

Importance: Significant for producing fuel additives that improve combustion efficiency.

Importance Details:

• Metrics: Range: 80000, Mean: 519.481, Median: 0.0, Standard Deviation: 6425.619, Max: 80000, Min: 0
• Grade: 0.020

Type: Float

Meaning: Hydrogen production capacity.

Importance: Critical for various refining processes, including hydrocracking and hydrotreating.

Importance Details:

• Metrics: Range: 275, Mean: 21.312, Median: 0.0, Standard Deviation: 48.499, Max: 275, Min: 0
• Grade: 0.010

Type: Float

Meaning: Coke production capacity.

Importance: Important for understanding the refinery's ability to process heavy crudes.

Importance Details:

• Metrics: Range: 48820, Mean: 5884.318, Median: 0.0, Standard Deviation: 9812.906, Max: 48820, Min: 0
• Grade: 0.030

Type: Float

Meaning: Sulfur recovery capacity.

Importance: Critical for environmental compliance and reducing the sulfur content in products.

Importance Details:

• Metrics: Range: 3203, Mean: 328.883, Median: 112.0, Standard Deviation: 515.856, Max: 3203, Min: 0
• Grade: 0.020

Type: Float

Meaning: Asphalt production capacity.

Importance: Significant for understanding the refinery’s ability to produce asphalt for road construction and other applications.

Importance Details:

• Metrics: Range: 49000, Mean: 5208.403, Median: 0.0, Standard Deviation: 9365.105, Max: 49000, Min: 0
• Grade: 0.020

• TYPE: 0.200
• STATUS: 0.250
• POSREL: 0.200

• CAPACITY: 0.200
• US_RANK: 0.100
• CRUDE: 0.150
• VACDIST: 0.100
• COKING: 0.050
• THERMALOP: 0.020
• CATCRACK: 0.100
• CATREFORM: 0.050
• CATHYDCRCK: 0.050
• CATHYDTRT: 0.100
• ALKY: 0.030
• POLDIM: 0.010
• AROMATIC: 0.020
• ISOMER: 0.030
• LUBES: 0.020
• OXYGENATES: 0.020
• HYDRGN: 0.010
• COKE: 0.030
• SULFUR: 0.020
• ASPHALT: 0.020

• Total Qualitative Grade: 0.650
• Total Quantitative Grade: 0.350
• Overall Dataset Importance Grade: 1.000